Skip Navigation LinksMetrix>Products>Seismic>Sensors>SA6210 Low-Profile Accelerometer

SA6210 Low-Profile Accelerometer

OverviewDocumentation

Overview

Model: SA6210

The Metrix SA6210 Low-Profile Accelerometer uses a side-exit cable connection that allows it to be used in physically constrained locations where a top-exit cable design will not fit.  The SA6210 offers performance characteristics similar to our SA6200A, but with a slightly wider frequency response and a higher mounted resonant frequency.  The table below summarizes the primary characteristics for each of our standard-temperature accelerometer offerings:

 

  SA6200A
SA6200 SA6210 SA6250
Freq Response (+/- 3dB) 0.5 Hz - 10 kHz  0.5 Hz - 12 kHz 0.2 Hz - 11.5 kHz 0.8 Hz - 15 kHz
Mounted Resonance 13 kHz 18 kHz 25 kHz 40 kHz
Sensing Element Quartz Quartz Ceramic Ceramic
Cable Connector Top Top Side Top


A built-in amplifier provides a 100mV/g low-impedance, constant-current output that is compatible with vibration monitoring systems, electronic switches, and 4-20mA signal conditioners.


The sensor consists of a temperature-stabilized piezo-electric core and an amplifier, packaged together in a 316L stainless steel case that is electrically isolated from the sensing circuit. It is mounted using a through-bolt rather than a base-mounted stud, and is available in both ¼-28 and M6 thread sizes. The through-bolt design allows the cable connector to be rotated to any orientation. 

 

Product Aprox. Weight: 145 g (5.1 oz)